LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (MULTIPORT Fuel Injection (MFI) - 3.0L - Introduction (1 Of 2)) >> Service Specification(S)

Service Specification(S)

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
ITEMS STANDARD VALUE
Fuel pressure kPa (psi) Approximately 324 (47) at curb idle
Heated oxygen sensor output voltage V 0.6 - 1.0
Linear air-fuel ratio sensor heater resistance Ω 2.3 - 4.2 [at 20°C (68°F)]
Heated oxygen sensor (rear) heater resistance Ω 11 - 18 [at 20°C (68°F)]
Injector coil resistance Ω 10.5 - 13.5 [at 20°C (68°F)]
Oil feeder control valve coil resistance Ω 6.9 - 7.9 [at 20°C (68°F)]