General Specification(S)
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
| ITEMS | SPECIFICATIONS | |
|---|---|---|
| Throttle body | Throttle bore mm (in.) | 65 (2.56) |
| Throttle position sensor | Hall element type | |
| Throttle actuator control motor | DC motor type, having brushes | |
| Engine control module (ECM) | Identification model No. | E6T80371 < Vehicles for USA > E6T80376 < Vehicles for CANADA > |
| Sensors | Mass airflow sensor | Heat sensitizing type |
| Barometric pressure sensor | Semiconductor diffused pressure type | |
| Intake air temperature sensor | Thermistor type | |
| Engine coolant temperature sensor | Thermistor type | |
| Heated oxygen sensor (rear) | Zirconia type | |
| Accelerator pedal position sensor | Hall element type | |
| Camshaft position sensor | Magneto resistance element type | |
| Crankshaft position sensor | Magneto resistance element type | |
| Knock sensor | Piezoelectric element type | |
| Manifold absolute pressure sensor | Piezo resistive semiconductor type | |
| Fuel tank differential pressure sensor | Piezo resistive semiconductor type | |
| Fuel tank temperature sensor | Thermistor type | |
| Actuators | Multiport fuel injection (MFI) relay | Contact switch type |
| Fuel pump relay | Contact switch type | |
| Throttle actuator control motor relay | Contact switch type | |
| Starter relay | Contact switch type | |
| A/C compressor relay | Contact switch type | |
| Injector type and number | Electromagnetic type, 6 | |
| Injector identification mark | KLN340C | |
| Oil feeder control valve | Duty cycle type solenoid valve | |
| Exhaust gas recirculation (EGR) valve | Stepper motor type | |
| Evaporative emission purge solenoid | Duty cycle type solenoid valve | |
| Evaporative emission ventilation solenoid | ON/OFF control type solenoid valve | |