<< B >> Differential Case Assembly/Differential Side Bearing Spacer/Differential Side Bearing Removal
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
When removing the differential case assembly, remove it slowly with care not to drop the differential side bearing spacer and the differential side bearing outer race.
- Remove the differential case assembly, differential side bearing spacer and differential side bearing outer race.NOTE: Identify the RH and LH side bearing spacers as a reference for the reassembly operation.
- Use special tool side bearing puller (MB990810) to remove the differential side bearing inner race.NOTE: Hook the claws of the special tool on the differential side bearing inner race through two cut-off parts on the differential case side.