LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer GT >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Active Stability Control System (ASC) - With Diagnostics) >> Diagnosis >> Diagnostic Trouble Code Procedures >> Code No. C104B FL inlet valve; Code No. C104F FR inlet valve; Code No. C1053 RL inlet valve; Code No. C1057 RR inlet valve; Code No. C105F FL outlet valve; Code No. C1063 FR outlet valve; Code No. C1067 RL outlet valve; Code No. C105B RR outlet valve; Code No. C1200 FL-RR cut valve; Code No. C1204 FR-RL cut valve; Code No. C1208 FL-RR suction valve; Code No. C120C FR-RL suction valve >> Notes

Code No. C104B FL inlet valve; Code No. C104F FR inlet valve; Code No. C1053 RL inlet valve; Code No. C1057 RR inlet valve; Code No. C105F FL outlet valve; Code No. C1063 FR outlet valve; Code No. C1067 RL outlet valve; Code No. C105B RR outlet valve; Code No. C1200 FL-RR cut valve; Code No. C1204 FR-RL cut valve; Code No. C1208 FL-RR suction valve; Code No. C120C FR-RL suction valve: Notes

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • If there is any problem in the CAN bus lines, an incorrect DTC may be stored. Prior to this diagnosis, diagnose the CAN bus lines (Refer to CAN BUS DIAGNOSTICS TABLE ).
  • Whenever ECU is replaced, ensure that the CAN bus lines are normal.
scientia non olet · About LEMON Manuals