LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) Diagnosis & On-Vehicle Service - With Diagnostics - Lancer >> Transaxle Assembly >> Removal And Installation >> Removal Service Points >> << E >> Transaxle Mounting Bracket Removal

<< E >> Transaxle Mounting Bracket Removal

  1. Place a garage jack against the transaxle case with a piece of wood in between to support the engine and transaxle assembly.
  2. Operate a garage jack so that the weight of the engine and transaxle assembly is not applied to the transaxle mounting insulator, and remove the transaxle mounting bracket.
scientia non olet · About LEMON Manuals