LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) Diagnosis & On-Vehicle Service - With Diagnostics - Lancer >> Diagnosis >> Diagnostic Trouble Code Procedures >> DTC U0001: Malfunction of CAN Communication Circuit >> Diagnostic Procedure

Diagnostic Procedure

  1. STEP 1. Using scan tool MB991958, diagnose the CAN bus lines. 

    Use scan tool MB991958 to perform the CAN bus diagnosis.

    Q: Is the check result normal? 

    1. YES:  Intermittent malfunction
    2. NO:  Repair the CAN bus lines (Refer to DIAGNOSTIC TROUBLE CODE TABLE ).
scientia non olet · About LEMON Manuals