LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension & Wheel Alignment - Lancer >> Stabilizer Bar >> Removal And Installation >> Installation Service Point >> >> A << Stabilizer Bar/Bushing/Stabilizer Bracket Installation

>> A << Stabilizer Bar/Bushing/Stabilizer Bracket Installation

Position the identification mark of the stabilizer bar at the left side of the vehicle as shown in the figure, and tighten the stabilizer bracket mounting bolt.

Fig 1: Positioning Identification Mark Of Stabilizer Bar
G09626953Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals