INSPECTION PROCEDURE 3: Body Tilting: Diagnosis
- STEP 1. Check for weak or deteriorated bushings.
Q: Are the bushings in good condition?
- YES: Go to Step 2.
- NO: Replace the faulty part, then go to Step 5.
- STEP 2. Check for weak or broken springs.
Q: Are the springs in good condition?
- YES: Go to Step 3.
- NO: Replace the faulty part, then go to Step 5.
- STEP 3. Check the upper arms and/or lower arms and/or control links for deformity or damage.
Q: Are the upper arms and/or lower arms and/or control links deformed or damaged?
- YES: Replace the faulty part, then go to Step 5.
- NO: Go to Step 4.
- STEP 4. Check the trailing arms for deformity or damage.
Q: Are the trailing arms deformed or damaged?
- YES: Replace the faulty part, then go to Step 5.
- NO: Go to Step 5.
- STEP 5. Retest the system.
Q: Is the malfunction eliminated?
- YES: The procedure is complete.
- NO: Return to Step 1.