Removal And Installation: Notes

CAUTION: The parts indicated by * are the bolts/nuts with friction coefficient stabilizer. In removal, ensure there is no damage, clean dust and soiling from the bearing and thread surfaces, and tighten them to the specified torque.

Fig 1: Removing/Installing Control Link, Upper Arm And Lower Arm Mounting Bolts With Torque Specifications (Type A)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Removing/Installing Control Link, Upper Arm And Lower Arm Mounting Bolts With Torque Specifications (Type B)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.