LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Steering >> Power Steering - Lancer >> Steering Column Shaft Assembly >> Removal And Installation >> Installation Service Points >> >> B << Steering Column Bolt (Steering Column Shaft Assembly And Steering Gear & Linkage Connection) Installation

>> B << Steering Column Bolt (Steering Column Shaft Assembly And Steering Gear & Linkage Connection) Installation

  1. While sliding shaft A from shaft B with the clip claw as shown in illustration being pinched, connect the steering column shaft assembly and the steering gear and linkage.
  2. Insert the steering column bolt from the no tapped bolt hole, and tighten it to the specified torque.

    Tightening torque: 20 ± 5 N.m (15 ± 4 ft-lb) 

    Fig 1: Connecting Steering Column Shaft Assembly, Steering Gear And Linkage
    G07032703Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals