<< A >> Tie-Rod Removal

Move the bellows and pull the rack bar toward arrow direction.

Fig 1: Pulling Rack Bar
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

CAUTION: Do not tighten the vise strongly in order not to damage the rack bar.
Wrap rack bar with cloth in order not to damage, and fix the rack bar with a vise.
Use special tool variable spanner (MB992249) to remove the tie-rod.

Fig 2: Removing Tie-Rod Using Special Tool Variable Spanner (MB992249)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.