LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Steering >> Power Steering - Lancer >> Power Steering Gear Box And Linkage >> Disassembly And Assembly >> Assembly Service Points >> >> C << Tie-Rod End/Jam Nut Installation

>> C << Tie-Rod End/Jam Nut Installation

Screw in the tie-rod to the length shown in illustration, and hand-tighten the jam nut.

NOTE: Install the steering gear and linkage to the body, adjust the toe-in, and then tighten the jam nut to the specified torque.
Fig 1: Identifying Tie-Rod Length
G07032660Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals