LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Steering >> Power Steering - Lancer >> Power Steering Gear Box And Linkage >> Disassembly And Assembly >> Assembly Service Points >> >> A << Tie-Rod Installation

>> A << Tie-Rod Installation

CAUTION: Do not tighten the vise strongly in order not to damage the rack bar.
  1. Wrap rack bar with cloth in order not to damage, and fix the rack bar with a vise.
  2. Use special tool variable spanner (MB992249) to tighten the tie-rod to the specified torque.

    Tightening torque: 89 ± 9 N.m 

    Fig 1: Removing Tie-Rod Use Special Tool Variable Spanner (Mb992249)
    G07032716Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals