LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Steering >> Electronic Steering >> Electric Power Steering (EPS) - With Diagnostics - Lancer >> Power Steering Gear Box And Linkage >> Disassembly And Assembly >> Disassembly Service Point >> << A >> Tie-Rod Removal

<< A >> Tie-Rod Removal

CAUTION: Be careful not to damage the rack bar and the teeth surface.
  1. Fold the left bellows back, and then use a spanner to counterhold the flats (A) on the rack end.
  2. Apply the special tool "variable spanner" MB992249 to the B portion as shown to remove the tie rod.
    NOTE: There are not flats on the right rack bar. Therefore, counterhold the left rack end even when you remove the right tie rod.
    Fig 1: Identifying Flats On Rack End
    G09627487Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals