LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Supplemental Restraint System (SRS) - With Diagnostics - Lancer >> Post-Collision Diagnosis >> Repair Procedure >> Occupant Classification-Ecu And Weight Sensor

Occupant Classification-Ecu And Weight Sensor

  1. Check the occupant classification-ECU case and weight sensor for dents, cracks or deformation.
  2. Check the connector for damage, and the terminals for deformation.
  3. Check the installation of the occupant classification-ECU and weight sensor.
  4. Check the diagnostic trouble code of the occupant classification-ECU and replace the front seat cushion frame (RH) < Except RALLIART >, slide adjuster (RH) < RALLIART > if DTC B1BA7 is stored.
    Fig 1: Identifying Occupant Classification-ECU And Weight Sensor
    G09629689Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals