LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Maintenance >> Schedule >> General Information - Lancer >> Maintenance Service (2.0L Engine Non-Turbo, 2.4L Engine) >> 17. Rear Drum Brake Linings And Rear Wheel Cylinders >> Inspect For Wear And Leaks >> Brake Drum Inside Diameter Check

Brake Drum Inside Diameter Check

  1. Remove the brake drum.
  2. Measure the inside diameter of the brake drum at two or more locations.

    Standard value: 203 mm (8.0 inches) 

    Limit: 205 mm (8.1 inches) 

  3. Replace the brake drums, shoe and lining assembly when wear exceeds the limit value or is badly imbalanced.
    Fig 1: Checking Brake Drum Inside Diameter
    G05376284Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals