LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Maintenance >> Schedule >> General Information - Lancer >> Maintenance Service (2.0L Engine Non-Turbo, 2.4L Engine) >> 11. Transaxle Oil < M/T > >> Check Oil Level And Condition >> Transaxle Oil Replacement

Transaxle Oil Replacement

  1. Remove the filler plug and gasket.
  2. Remove the drain plug and gasket, and drain the oil.
  3. Tighten the drain plug and new gasket, to the specified torque.

    Tightening torque: 49 ± 19 N.m (37 ± 14 ft-lb) 

  4. Fill with Mitsubishi Motors Genuine NEW MULTI GEAR OIL API classification GL-3, SAE 75W-80 until the level comes to the lower portion of filler plug hole.

    Quantity: 2.5 dm 3  (2.6 quarts) 

    Fig 1: Identifying Filler And Drain Plug
    G05374019Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  5. Tighten the filler plug and new gasket to the specified torque.

    Tightening torque: 49 ± 19 N.m (37 ± 14 ft-lb) 

    Fig 2: Identifying Filler Plug Hole, Gasket And Filler Plug
    G06672032Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals