LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Manual Transaxle Overhaul - Lancer) >> Input Shaft >> Disassembly And Assembly >> Assembly Service Points >> >> D << Radial Ball Bearing Installation

>> D << Radial Ball Bearing Installation

WARNING: This page is about a different variant/trim than selected.
  1. Before assembly, make sure that the radial ball bearing faces the correct direction.
    Fig 1: Installing Radial Ball Bearing
    G05375676Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Using special tools MD998812, MD998813, MD998820 and MD998917, install the radial ball bearing.
    Fig 2: Installing Radial Ball Bearing Using Special Tools MD998812, MD998813, MD998820 And MD998917
    G05900812Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals