LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Manual Transaxle Overhaul - Lancer) >> Differential >> Disassembly And Assembly >> Disassembly Service Points >> << A >> Tapered Roller Bearing Inner Race Removal

<< A >> Tapered Roller Bearing Inner Race Removal

WARNING: This page is about a different variant/trim than selected.
  1. Using special tool MD998917 and MB991395, support the tapered roller bearing inner race, and then set them on the press.
  2. Push down on the differential case with the press and remove the tapered roller bearing inner race.
    Fig 1: Supporting Tapered Roller Bearing Inner Race Using Special Tool MD998917 And MB991395
    G05375717Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals