Adjusting Snap Rings And Spacers

WARNING: This page is about a different variant/trim than selected.

ADJUSTMENT SHIMS THICKNESS SPECIFICATION (FOR DIFFERENTIAL SIDE LH TAPERED ROLLER BEARING PRELOAD ADJUSTMENT)

Thickness mm (in)	Thickness mm (in)
1.99 - 2.01 (0.0783 - 0.0791)	2.44 - 2.46 (0.0961 - 0.0969)
2.04 - 2.06 (0.0803 - 0.0811)	2.49 - 2.51 (0.0980 - 0.0988)
2.09 - 2.11 (0.0823 - 0.0831)	2.54 - 2.56 (0.1000 - 0.1008)
2.14 - 2.16 (0.0843 - 0.0850)	2.59 - 2.61 (0.1020 - 0.1028)
2.19 - 2.21 (0.0862 - 0.0870)	2.64 - 2.66 (0.1039 - 0.1047)
2.24 - 2.26 (0.0882 - 0.0890)	2.69 - 2.71 (0.1059 - 0.1067)
2.29 - 2.31 (0.0902 - 0.0909)	2.74 - 2.76 (0.1079 - 0.1087)
2.34 - 2.36 (0.0921 - 0.0929)	2.79 - 2.81 (0.1098 - 0.1106)
2.39 - 2.41 (0.0941 - 0.0949)	2.84 - 2.86 (0.1118 - 0.1126)

ADJUSTMENT SHIMS THICKNESS SPECIFICATION (FOR OUTPUT SHAFT BEARING PRELOAD ADJUSTMENT)

Thickness mm (in)	Thickness mm (in)
1.29 - 1.31 (0.0508 - 0.0516)	1.94 - 1.96 (0.0764 - 0.0772)
1.34 - 1.36 (0.0528 - 0.0535)	1.99 - 2.01 (0.0783 - 0.0791)
1.39 - 1.41 (0.0547 - 0.0555)	2.04 - 2.06 (0.0803 - 0.0811)
1.44 - 1.46 (0.0567 - 0.0575)	2.09 - 2.11 (0.0823 - 0.0831)
1.49 - 1.51 (0.0587 - 0.0594)	2.14 - 2.16 (0.0843 - 0.0850)
1.54 - 1.56 (0.0606 - 0.0614)	2.19 - 2.21 (0.0862 - 0.0870)
1.59 - 1.61 (0.0626 - 0.0634)	2.24 - 2.26 (0.0882 - 0.0890)
1.64 - 1.66 (0.0646 - 0.0654)	2.29 - 2.31 (0.0902 - 0.0909)
1.69 - 1.71 (0.0665 - 0.0673)	2.34 - 2.36 (0.0921 - 0.0929)
1.74 - 1.76 (0.0685 - 0.0693)	2.39 - 2.41 (0.0941 - 0.0949)
1.79 - 1.81 (0.0705 - 0.0713)	2.44 - 2.46 (0.0961 - 0.0969)
1.84 - 1.86 (0.0724 - 0.0732)	2.49 - 2.51 (0.0980 - 0.0988)
1.89 - 1.91 (0.0744 - 0.0752)	-

SHAFT SNAP RINGS THICKNESS SPECIFICATION (FOR INPUT SHAFT SYNCHRONIZER HUB NO. 3 BUSHING END PLAY ADJUSTMENT)

Thickness mm (in)	Thickness mm (in)
1.75 - 1.80 (0.0689 - 0.0709)	2.00 - 2.05 (0.0787 - 0.0807)
1.80 - 1.85 (0.0709 - 0.0728)	2.05 - 2.10 (0.0807 - 0.0827)
1.85 - 1.90 (0.0728 - 0.0748)	2.10 - 2.15 (0.0827 - 0.0846)
1.90 - 1.95 (0.0748 - 0.0768)	2.15 - 2.20 (0.0846 - 0.0866)
1.95 - 2.00 (0.0768 - 0.0787)	-