LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Clutch Overhaul - Lancer) >> Clutch >> Clutch Inspection >> Concentric Slave Cylinder Adapter

Concentric Slave Cylinder Adapter

WARNING: This page is about a different variant/trim than selected.
  1. Check the O-ring for damage and deformation. If the O-ring is damage or deformed, replace the concentric slave cylinder adapter.
  2. Check the surface that touches the concentric slave cylinder for contamination. If contaminated, clean the surface the specified clutch fluid.

    Specified fluid: Brake Fluid DOT 3 or DOT 4 

  3. Make sure there are no deformed and/or missing clips.
    Fig 1: Identifying Concentric Slave Cylinder Adapter And O-Ring
    G09625555Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals