LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Clutch Overhaul - Lancer) >> Clutch >> Clutch Inspection >> Clutch Cover

Clutch Cover

WARNING: This page is about a different variant/trim than selected.
  1. Check the diaphragm spring end for wear and uneven height. Replace if wear is evident or height difference exceeds the limit.

    Limit: 0.5 mm (0.019 inch) 

  2. Check the pressure plate surface for wear, cracks and discoloration.
  3. Check the rivets of the strap plate for looseness. If loose, replace the clutch set.
    Fig 1: Checking Diaphragm Spring End For Wear And Uneven Height
    G09625553Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals