Diagnostic Trouble Code Table
WARNING: This page is about a different variant/trim than selected.
CAUTION:
During diagnosis, a DTC associated with other system may be set when the ignition switch is turned ON with connector(s) disconnected. On completion, confirm all systems for diagnostic trouble code(s). If diagnostic trouble code(s) are set, erase them all.
DIAGNOSTIC TROUBLE CODE TABLE
| DTC No. | Diagnostic item |
|---|---|
| P0563 | Power supply system |
| P198D | EEPROM system |
| P198E | Lever position sensor system |
| P198F | |
| U0001 | Bus off |
| U0100 | Engine time-out error |
| U0101 | TC-SST time-out error |
| U0121 | ASC time-out error |
| U0141 | ETACS time-out error |