LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Twin Clutch SPORTRONIC Shift Transmission (TC-SST) - With Diagnostics - Lancer (5 Of 6)) >> Diagnosis < Shift Lever > >> Diagnosis Function >> Fail-Safe Function

Fail-Safe Function

WARNING: This page is about a different variant/trim than selected.

If an abnormality occurs to the signal of sensors, switches, solenoids, or others, the shift lever-ECU performs a control for the driver safety and system protection. The control contents are as follows.

FAIL-SAFE REFERENCE

Diagnostic trouble code No. Item Control content
P198D EEPROM Normal driving can be performed, and displays an occurrence of trouble to the multi information display to warn the driver.
P198E Lever position sensor system (Malfunction of one sensor) Normal driving can be performed, and displays an occurrence of trouble to the multi information display to warn the driver.
P198F Lever position sensor system (Malfunction of two sensors) The lever position cannot be identified, and the clutch open at TC-SST side prohibits the vehicle from driving. Then displays an occurrence of trouble to the multi information display to warn the driver.
scientia non olet · About LEMON Manuals