LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Twin Clutch SPORTRONIC Shift Transmission (TC-SST) - With Diagnostics - Lancer (5 Of 6)) >> Diagnosis < Shift Lever > >> Data List Reference Table

Data List Reference Table

WARNING: This page is about a different variant/trim than selected.
Item No. Display on scan tool Check conditions Normal conditions
1 Lever position Shift lever position Shift lever position: P P
Shift lever position: R<==>P R-P
Shift lever position: R R
Shift lever position: N<==>R N-R
Shift lever position: N N
Shift lever position: D<==>N D-N
Shift lever position: D D
Shift lever position: Manual mode Manual
Shift lever position: Upshift and hold +
Shift lever position: Downshift and hold -
3 Battery voltage (CAN data) Ignition switch: ON Battery voltage (12 V)
4 Back light voltage Ignition switch: ON Shift lever position: R 20 - 120 digits
Shift lever position: Other than above 10 digits or less
5 Shift lock voltage Ignition switch: ON
  • Shift lever position: P
  • Brake pedal: Depressed
500 digits or more
Shift lever position: Other than above 100 digits or less
6 Battery voltage Ignition switch: ON 520 - 920 digits
7 Shift indicator voltage (D range) Ignition switch: ON Shift lever position: D 10 - 370 digits
Shift lever position: Other than above 10 digits or less
8 Shift indicator voltage (M mode) Ignition switch: ON Shift lever position: Manual mode 10 - 370 digits
Shift lever position: Other than above 10 digits or less
9 Shift indicator voltage (N range) Ignition switch: ON Shift lever position: N 10 - 370 digits
Shift lever position: Other than above 10 digits or less
10 Shift indicator voltage (P range) Ignition switch: ON Shift lever position: P 10 - 370 digits
Shift lever position: Other than above 10 digits or less
11 Shift indicator voltage (R range) Ignition switch: ON Shift lever position: R 10 - 370 digits
Shift lever position: Other than above 10 digits or less
16 Shift indicator PWM(1) (Day) Ignition switch: ON 100%
17 Shift indicator PWM(1) (Night) Ignition switch: ON 20%
20 ILL+ Ignition switch: ON Headlight (taillight): ON ON
Headlight (taillight): OFF OFF
23 Ignition SW Ignition switch: ON ON
Ignition switch: START START
24 Shift position
  • Shift lever position: Manual mode
  • Driving at a constant speed in 1st
1st
  • Shift lever position: Manual mode
  • Driving at a constant speed in 2nd
2nd
  • Shift lever position: Manual mode
  • Driving at a constant speed in 3rd
3rd
  • Shift lever position: Manual mode
  • Driving at a constant speed in 4th
4th
  • Shift lever position: Manual mode
  • Driving at a constant speed in 5th
5th
  • Shift lever position: Manual mode
  • Driving at a constant speed in 6th
6th
Ignition switch: ON Shift lever position: D D
Shift lever position: N N
Shift lever position: P P
Shift lever position: R R
  • Shift lever position: D
  • Driving at a constant speed in 1st
D1
  • Shift lever position: D
  • Driving at a constant speed in 2nd
D2
  • Shift lever position: D
  • Driving at a constant speed in 3rd
D3
  • Shift lever position: D
  • Driving at a constant speed in 4th
D4
  • Shift lever position: D
  • Driving at a constant speed in 5th
D5
  • Shift lever position: D
  • Driving at a constant speed in 6th
D6
25 Vehicle speed Driving at a constant speed of 20 km/h 20 mph
30 Drive mode SW (output data) Ignition switch: ON Switch position: Operate the switch toward the front of the vehicle, and hold it +
Switch position: Operate the switch toward the back of the vehicle, and hold it -
Switch position: Other than above Not active
32 Lever position (output data) Ignition switch: ON Shift lever position: P P
Shift lever position: R<==>P R-P
Shift lever position: R R
Shift lever position: N<==>R N-R
Shift lever position: N N
Shift lever position: D<==>N D-N
Shift lever position: D D
Shift lever position: Manual mode Manual
Shift lever position: Upshift and hold +
Shift lever position: Downshift and hold -
(1) PWM indicates the duty value (ratio).