LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (Twin Clutch SPORTRONIC Shift Transmission (TC-SST) - With Diagnostics - Lancer (6 Of 6)) >> Twin Clutch SST Control Mode Switch >> Inspection >> Twin Clutch SST Control Mode Switch Check

Twin Clutch SST Control Mode Switch Check

WARNING: This page is about a different variant/trim than selected.
  1. Check the continuity between the connector terminals of twin clutch SST control mode switch.
    Terminal number Switch position Continuity
    2 - 3 Operate to direction A, then hold. Yes (2 Ω or less)
    Other than above Not present
    1 - 3 Operate to direction B, then hold. Yes (2 Ω or less)
    Other than above Not present
  2. When other than above, replace the twin clutch SST control mode switch.
    Fig 1: Checking Continuity Between Connector Terminals Of Twin Clutch SST Control Mode Switch
    G09625947Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals