System Check

WARNING: This page is about a different variant/trim than selected.

Inspection procedure	Check conditions		Items to be checked (Normal status)	Possible cause of abnormality
1	Release the brake pedal.	Ignition switch position: LOCK (OFF) or ACC	The shift lever cannot be moved out of the P position.	Shift lever assembly abnormality (seizure, damage, or others) Electrical circuit abnormality (short circuit in solenoid or wiring harness) Key interlock mechanism abnormality
2	Depress the brake pedal.	Ignition switch position: LOCK (OFF) or ACC		Shift lever assembly abnormality (seizure, damage, or others) Key interlock mechanism abnormality
3	Release the brake pedal.	Ignition switch position: ON		Shift lever assembly abnormality (seizure, damage, or others) Electrical circuit abnormality (short circuit in solenoid or wiring harness)
4	Depress the brake pedal.	Ignition switch position: ON	The shift lever can be moved from the P position to other positions smoothly.	Shift lever assembly abnormality (seizure, damage, or others) Electrical circuit abnormality (open circuit in solenoid or wiring harness)