LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.4L - Lancer) >> Valve Stem Seal >> Removal And Installation >> Installation Service Points >> >> C << Valve Tappet Installation

>> C << Valve Tappet Installation

WARNING: This page is about a different variant/trim than selected.
  1. Apply a small amount of engine oil to the valve tappets.
    CAUTION:
    • Do not use pliers or other tools to install the valve tappets. Always install them by hand.
    • Be sure to install the valve tappets in the same position as before.
  2. Install the valve tappet to the cylinder head.
    Fig 1: Removing/Installing Valve Tappet
    G05374144Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals