General Information
WARNING: This page is about a different variant/trim than selected.
The 4B12 (2.4 L) engine is an in-line four-cylinder engine. The cylinder numbers are assigned as 1-2-3-4 from the front of the engine (timing chain side). The firing order is 1-3-4-2.
| ITEMS | SPECIFICATIONS | ||
|---|---|---|---|
| Type | In-line DOHC | ||
| Number of cylinders | 4 | ||
| Bore mm (in) | 88 (3.46) | ||
| Stroke mm (in) | 97 (3.82) | ||
| Total displacement cm3 (cu. in) | 2,359 | ||
| Compression ratio | 10.5 | ||
| Firing order | 1-3-4-2 | ||
| Valve timing | Intake valve | Opens (BTDC) | 0° - 40° |
| Closes (ABDC) | 64° - 24° | ||
| Exhaust valve | Opens (BBDC) | 44° - 24° | |
| Closes (ATDC) | 0° - 20° | ||
| Lubrication system | Pressure feed, full-flow filtration | ||
| Oil pump type | Trochoid type | ||