LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.4L - Lancer) >> Engine Assembly >> Removal And Installation >> Removal Service Points >> << G >> Engine Assembly Removal

<< G >> Engine Assembly Removal

WARNING: This page is about a different variant/trim than selected.
  1. Mount the special tool MB991454 to the power steering oil pump bracket and the engine hanger, and set the chain block.
  2. After checking that all cables, hoses and wiring harness connectors and so on are disconnected from the engine, lift the engine assembly slowly with the chain block to remove the engine assembly upward from the engine compartment.
    Fig 1: Identifying Special Tool MB991454
    G05374216Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals