LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.4L - Lancer) >> Crankshaft Pulley >> Removal And Installation >> Removal Service Points >> << C >> Crankshaft Pulley Center Bolt/Crankshaft Pulley Washer/Crankshaft Pulley Removal

<< C >> Crankshaft Pulley Center Bolt/Crankshaft Pulley Washer/Crankshaft Pulley Removal

WARNING: This page is about a different variant/trim than selected.
  1. Hold the crankshaft pulley with special tools MB990767 and MD998719.
  2. Loosen the crankshaft pulley center bolt and remove the crankshaft pulley center bolt, crankshaft pulley washer and crankshaft pulley.
    Fig 1: Holding Crankshaft Drive Sprocket Using Special Tools MB990767 And MD998719
    G05374113Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals