Section 19 (MULTIPORT Fuel Injection (MFI) - 2.0L Turbo - Lancer - Reference Table, ECM Check, On-Vehicle Service, R & I)
WARNING: This page is about a different variant/trim than selected.
- Data List Reference Table
- General Scan Tool (GST) Mode 01 Reference Table
- Actuator Test Reference Table
- Check At The Engine Control Module (ECM)
- Inspection Procedure Using An Oscilloscope
- On-Vehicle Service
- Component Location
- Throttle Body (Throttle Valve Area) Cleaning
- Fuel Pressure Test
- How To Reduce Pressurized Fuel Pressure
- Fuel Tank Pump Operation Check
- MULTIPORT Fuel Injection (MFI) Relay Continuity Check
- Fuel Pump Relay Continuity Check
- Injector Relay Continuity Check
- Throttle Actuator Control Motor Relay Continuity Check
- Fuel Pump Circuit Resistor Check
- Intake Air Temperature Sensor Check
- Engine Coolant Temperature Sensor Check
- Heated Oxygen Sensor Check
- Injector Check
- Throttle Actuator Control Motor Check
- Engine Oil Control Valve Check
- Evaporative Emission Ventilation Solenoid Check
- Evaporative Emission Purge Solenoid Check
- Turbocharger WASTEGATE Solenoid Check
- Check The Brake Override For Correct Function
- Injector
- Throttle Body Assembly
- Engine Control Resistor
- Engine Control Module (ECM)