LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Propeller Shaft - Lancer RALLIART, Se) >> On-Vehicle Service >> Propeller Shaft Universal Joint Check >> Propeller Shaft Visual Check

Propeller Shaft Visual Check

WARNING: This page is about a different variant/trim than selected.
  1. Place the gearshift lever to the "N" position < TC-SST > or the selector lever to the "N" position < CVT >.
  2. Then place the drive mode selector to the "2WD" position < Type B >.
  3. Check the propeller shaft for dent, damage or crack.
  4. Check the propeller shaft universal joint, oil seal for crack or damage. If abnormality is recognized, replace the propeller shaft with a new one.
    Fig 1: Identifying Propeller Shaft Oil Seal (Correct State)
    G06482442Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 2: Identifying Propeller Shaft Oil Seal (Incorrect State)
    G06482443Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals