LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Propeller Shaft - Lancer RALLIART, Se) >> On-Vehicle Service >> Propeller Shaft Universal Joint Check >> Propeller Shaft Universal Joint Play Check

Propeller Shaft Universal Joint Play Check

WARNING: This page is about a different variant/trim than selected.
  1. Place the gearshift lever to the "N" position < TC-SST > or the selector lever to the "N" position < CVT >.
  2. Then place the drive mode selector to the "2WD" position < Type B >.
  3. Hold the tube of propeller shaft by one hand, and apply force by the other hand to the flange yoke or sleeve yoke in rotating direction, axial direction, and perpendicular direction for checking looseness. If looseness is recognized, replace the propeller shaft with a new one.
    Fig 1: Checking Propeller Shaft Universal Joint Play
    G06482444Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals