Inspection Procedure 4: When the speech switch is pressed, the voice guide is not output. < Vehicles with MMCS >: Diagnosis
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- STEP 1. Check the diagnosis mode
Check if the hands free module can be switched to the diagnosis mode. (Refer to DIAGNOSIS MODE < VEHICLES WITH MMCS > .)
Q: Is the check result normal?
- YES: Go to Step 2
- NO: Perform INSPECTION PROCEDURE 5 "DIAGNOSIS MODE CANNOT BE MADE AN ENTRY."
- STEP 2. Operation check of the steering wheel remote control switch (audio remote control switch)
Check that the multivision display can be operated by the steering wheel remote control switch.
Q: Is the check result normal?
- YES: Go to Step 3
- NO: Troubleshoot the steering wheel remote control switch.
- STEP 3. Check the steering wheel remote control switch (speech switch).
Check the continuity of the steering wheel remote control switch. (Refer to STEERING WHEEL VOICE CONTROL SWITCH CHECK .)
Q: Is the check result normal?
- YES: Go to Step 4
- NO: Replace the steering wheel remote control switch.
- STEP 4. Temporarily replace the hands free module, and check the trouble symptom.
Q: Is the check result normal?
- YES: Replace the hands free module.
- NO: Replace the multivision display.