Pairing Operation Of BLUETOOTH® Device

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Display the pairing list screen, and select "Register Device."
NOTE: When the vehicle is being driven, or when the vehicle is driven during the pairing operation, "This function is disabled while driving." is displayed for 4 seconds, and the display returns to the pairing list screen.

Fig 1: Display - Pairing Screen
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Refer to the owner's manual for your device and enter into the device the pin code.
NOTE: When "Stop" is selected or the pairing is failed, the display returns to the pairing list screen.

Fig 2: Display - Register Device Stop Screen
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
When the pairing is completed, the display returns to the pairing list screen.
NOTE: When 7 Bluetooth® devices are already paired to the hands free module, "Maximum device paired. Please delete a paired device before pairing a new device." is displayed.

Fig 3: Display - Device Selection Screen
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.