LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Hands Free Module) >> On-Vehicle Service >> Methods For Pairing And Pairing Deletion With BLUETOOTH® Device Using MULTIVISION Display >> Notes

Methods For Pairing And Pairing Deletion With BLUETOOTH® Device Using MULTIVISION Display: Notes

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

As for vehicles with MMCS, "pairing" registration of the Bluetooth® device and deletion of paired device from hands free module can be done by touch panel operation on the multivision display.

NOTE:
  • For detail of the hands free module, you can see to access via the MITSUBISHI MOTORS web site. Please read and agree the "Warning about Links to the Web Sites of Other Companies" because it connects other than MITSUBISHI MOTORS web site.http://www.mitsubishi-motors.com/en/products/index.html
  • Some Bluetooth® devices (cellular phone and music player) may not be compatible with the hands free module.
  • A maximum of seven Bluetooth® devices can be registered.
  • This system cannot be used when a battery of Bluetooth® devices was exhausted.

DISPLAY THE PAIRING SCREEN. 

  1. Press "SETTINGS" button.
  2. Select "System" on "SET" screen.
  3. Select "Pairing" on "System" screen.
    Fig 1: Press Setting Button
    G09667295Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. "Pairing" screen will be displayed.
    Fig 2: Display - Pairing Screen
    G09667296Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.