The USB Adapter Data Cannot Be Replayed. < Vehicles With Radio And CD Player >: Diagnosis

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Required Special Tools:

MB991223: Harness Set
MB992006: Extra Fine Probe

STEP 1. Check the radio and CD player operation.
Check if the radio and CD player work normally and the sound is output.

Q: Is the check result normal?
- YES: Go to Step 2.
- NO: Troubleshoot the radio and CD player (Refer to TROUBLE SYMPTOM CHART ).
STEP 2. Check the external sounds input mode.
Check if the radio and CD player is switched to the "USB mode".

Q: Is the check result normal?
- YES: Go to Step 5.
- NO: Go to Step 3.
STEP 3. Check the USB adapter.
Check if the USB adapter works normally. (Refer to USB ADAPTER CHECK )

Q: Is the check result normal?
- YES: Go to Step 4.
- NO: Replace the USB adapter.
STEP 4. Check the USB cable.
Check that the USB cable is connected to the USB adapter normally. Or check the USB cable for damage such as bend.

Q: Is the check result normal?
- YES: Go to Step 5.
- NO: Replace or repair the USB cable.
STEP 5. Retest the system
Check whether an audio file, which is stored in the USB memory/iPod®, can be played.

Q: Is the check result normal?
- YES: The trouble can be an intermittent malfunction (Refer to HOW TO COPE WITH INTERMITTENT MALFUNCTION ).
- NO: Replace the radio and CD player.