LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Theft Alarm - With Diagnostics) >> On-Vehicle Service >> Inspection >> Theft-Alarm Indicator Check

Theft-Alarm Indicator Check

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the hazard indicator assembly.
  2. Connect the battery (+) terminal with the hazard indicator assembly connector terminal No. 13. Then, check if the theft-alarm indicator is illuminated when the battery (-) terminal and the hazard indicator assembly connector terminal No. 17 are connected.
  3. If the theft-alarm indicator is illuminated, it is judged good.
    NOTE: Make sure that the polarity is correct.
scientia non olet · About LEMON Manuals