Vehicles Without Rain Sensitive Auto Wiper
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Wiper/Washer Switch Connector Terminal (Vehicles Without Rain Sensitive Auto Wiper)
| Switch position | Tester connection | Specified condition | |
|---|---|---|---|
| OFF | - | Open circuit | |
| Windshield intermittent wiper interval adjusting knob | 8 - 3 | Operating the adjusting knob changes the resistance. | |
| Windshield wiper switch | HI | 8 - 4 | Continuity exists (2 ohms or less) |
| INT | 8 - 5 | Continuity exists (2 ohms or less) | |
| LO | 8 - 6 | Continuity exists (2 ohms or less) | |
| MIST | 8 - 10 | Continuity exists (2 ohms or less) | |
| Windshield washer switch | 8 - 7 | Continuity exists (2 ohms or less) | |
| Rear washer switch | 8 - 9 | Continuity exists (2 ohms or less) | |
| Rear wiper switch | 8 - 11 | Continuity exists (2 ohms or less) | |