LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Column Switch - With Diagnostics) >> Column Switch >> Wiper/Washer Switch Continuity Check >> Vehicles With Rain Sensitive Auto Wiper

Vehicles With Rain Sensitive Auto Wiper

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
Switch position Tester connection Specified condition
OFF - Open circuit
Windshield rain sensitive wiper function adjusting knob 8 - 3 Operating the adjusting knob changes the resistance.
Windshield wiper switch HI 8 - 4 Continuity exists (2 ohms or less)
AUTO 8 - 5 Continuity exists (2 ohms or less)
LO 8 - 6 Continuity exists (2 ohms or less)
MIST 8 - 10 Continuity exists (2 ohms or less)
Windshield washer switch 8 - 7 Continuity exists (2 ohms or less)
Rear washer switch 8 - 9 Continuity exists (2 ohms or less)
Rear wiper switch 8 - 11 Continuity exists (2 ohms or less)
Fig 1: Identifying Wiper/Washer Switch Connector Terminal (Vehicles With Rain Sensitive Auto Wiper)
G09667061Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.