LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Column Switch - With Diagnostics) >> Column Switch >> Removal And Installation >> Installation Service Point >> >> A << Column Switch Assembly Installation

>> A << Column Switch Assembly Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a pliers or similar tool, pinch and lift the band clump pin shown in the figure.
  2. Align the part "A" position in the figure with the steering lock side rib, and then insert the column switch assembly into the column shaft.
  3. After mounting the column switch assembly by securely fitting the column switch assembly claw with the column shaft groove, release the band clump pin.
    Fig 1: Installing Column Switch Assembly
    G09667059Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals