LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Twin Clutch SST - Lancer Evolution) >> Twin Clutch SST Control Mode Switch >> Inspection >> Twin Clutch SST Control Mode Switch Check

Twin Clutch SST Control Mode Switch Check

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the continuity between the connector terminals of twin clutch SST control mode switch.
    CONTINUITY SPECIFICATION

    Terminal number Switch position Continuity
    2 - 3 Operate to direction A, then hold. Yes (2 Ω or less)
    Other than above Not present
    1 - 3 Operate to direction B, then hold. Yes (2 Ω or less)
    Other than above Not present
  2. When other than above, replace the twin clutch SST control mode switch.
    Fig 1: Checking Continuity Between Connector Terminals Of Twin Clutch SST Control Mode Switch
    G05394258Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals