System Check

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

SHIFT LOCK MECHANISM INSPECTION REFERENCE

Inspection procedure	Check conditions		Items to be checked (Normal status)	Possible cause of abnormality
1	Release the brake pedal.	Ignition switch position: LOCK (OFF) or ACC	The shift lever cannot be moved out of the P position.	Shift lever assembly abnormality (seizure, damage, or others) Electrical circuit abnormality (short circuit in solenoid or wiring harness) Key interlock mechanism abnormality
2	Depress the brake pedal.	Ignition switch position: LOCK (OFF) or ACC		Shift lever assembly abnormality (seizure, damage, or others) Key interlock mechanism abnormality
3	Release the brake pedal.	Ignition switch position: ON		Shift lever assembly abnormality (seizure, damage, or others) Electrical circuit abnormality (short circuit in solenoid or wiring harness)
4	Depress the brake pedal.	Ignition switch position: ON	The shift lever can be moved from the P position to other positions smoothly.	Shift lever assembly abnormality (seizure, damage, or others) Electrical circuit abnormality (open circuit in solenoid or wiring harness)