LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Liftgate - Vehicles Without Power Liftgate) >> On-Vehicle Service >> Liftgate Alignment >> Adjustment Of Clearance Between Liftgate And Body

Adjustment Of Clearance Between Liftgate And Body

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the liftgate hinge mounting bolts to adjust the clearance between the liftgate and body.
  2. Tighten the liftgate hinge mounting bolts.

    Tightening torque: 12 ± 2 N.m (106 ± 17 in-lb) 

    Fig 1: Adjusting Clearance Between Liftgate And Body
    G09666185Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals