INSPECTION PROCEDURE A-5: Ignition "LOCK (OFF)" Position-Linked Door Unlock Function Does Not Operate: Notes
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Before replacing the ECU, ensure that the power supply circuit, the ground circuit and the communication circuit are normal.
- When the ETACS-ECU of vehicles without KOS is replaced, the encrypted code of the ignition key needs to be registered to the ETACS-ECU. (If the encrypted code is not registered, the engine cannot be started. Register the encrypted code as described in Immobilizer System - How to Register Key ID P.54A-40.)