LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Door System) >> On-Vehicle Service >> Door Inside Handle Check >> Door Inside Handle Lock Knob Stroke Check

Door Inside Handle Lock Knob Stroke Check

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the door trim assembly (Refer to DOOR TRIM ).
  2. Check that the stroke of the door inside handle lock knob meets the standard value.

    Standard value (B): 13.5 - 15.5 mm (0.53 - 0.61 in) [Target value: 14.5 mm (0.57 in)] 

  3. Check the door inside handle lock knob and door latch assembly. Replace them if the stroke is out of the standard value.
    Fig 1: Checking Door Inside Handle Lock Knob And Door Latch Assembly Play
    G09666150Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals