LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Manual Transaxle On-Vehicle Service - Lancer Evolution) >> Transaxle Assembly >> Removal And Installation >> Removal Service Points >> << F >> Transaxle Mounting Bracket Installation

<< F >> Transaxle Mounting Bracket Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place a garage jack against the transaxle case with a piece of wood in between to support the engine and transaxle assembly.
  2. Operate the garage jack so that the engine and transaxle assembly weight is not applied to the transaxle mounting insulator, and remove the transaxle mounting bracket.
scientia non olet · About LEMON Manuals