LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Windshield Wiper & Washer System) >> On-Vehicle Service >> Delayed Finishing Wipe Function Inspection

Delayed Finishing Wipe Function Inspection

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. When the washer lever of the column switch is operated for 0.5 seconds or longer with the ignition switch in the ACC or ON position, or when the intelligent washer function is enabled, the Delayed finishing wipe function injects the washer fluid and operates the wiper. The wiper operates once 6 seconds after the wiper operation is stopped. Check that the Delayed finishing wipe function works normally.
  2. If not, carry out the troubleshooting. (Refer to TROUBLESHOOTING HINTS  .)
    NOTE: Check that the Delayed finishing wipe function is set by the customization function. (Refer to ON-VEHICLE SERVICE  .)
scientia non olet · About LEMON Manuals