Adjustment Of Hood Level And Hood Striker Engagement
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the headlight support upper panel cover (Refer to RADIATOR GRILLE ).
- Loosen the hood latch mounting bolts but do not remove them. Move the hood latch up/down and left/right to align the hood level and adjust the hood striker engagement.
- After the adjustment, tighten the hood latch mounting bolts to 9.0 ± 1.0 N.m (80 ± 8 in-lb).
- Install the headlight support upper panel cover (Refer to RADIATOR GRILLE ).